Updated Nov 21, 2026· 10 min read

Key takeaways

  • Compare the best skate guards and soakers for hockey and figure skates, from rolling hard guards to terry blade covers, with sizing and care tips.

A sharpened skate blade is a precision edge, and it is surprisingly easy to ruin. A short walk across a concrete lobby or a gritty parking lot will nick and dull that edge, and blades tossed loose into a gear bag can cut straps, gloves, and each other. Moisture left on the steel after a session invites rust, which roughens the blade and shortens the time between sharpenings. Skate guards and soakers stop both kinds of damage, and they cost very little compared with the skates they protect.

Our top pick: Rollergard Ice Skate Guards, One Size Fits All. Runner-up: Guardog Ice Skate Hard Guards Chameleonz (Blue to Green).

The five picks below cover the two jobs separately. Hard guards from Rollergard and Guardog are rigid covers built for walking off the ice, and one of them rolls instead of clomping. The Elite Hockey Pro-Skate Guard splits the difference with a soft soaker body and a rubber walking sole. The A&R Sports Blade Cover and the EALER BDT100 are classic soakers made for drying and storing blades in the bag.

As an Amazon Associate, we earn from qualifying purchases.

What to look for in skate guards and soakers

Guards are for walking, soakers are for storage. This is the distinction that matters most. Hard guards are rigid covers with a channel that cradles the blade, made to be walked on between the locker room and the ice. Soakers are soft, absorbent covers that slip over the blade after skating to wick away meltwater and protect the edge in your bag. Walking in soakers wears through the fabric, and storing skates in hard guards traps moisture against the steel, so most skaters own one of each.

Match the cover to your blade type. Hockey, figure, and recreational blades differ in length, rocker, and end shape, and figure blades add a toe pick that some guard channels do not accommodate well. Check that the guard is listed for your skate type, and for two-piece hard guards, confirm the maximum blade length before you trim, because a guard cut too short cannot be made longer again.

Size soakers by skate size, not by guesswork. Soakers are sold in bands tied to boot size, and the bands differ between hockey and figure skates on the same chart. A soaker that is too small stretches thin and can leave part of the blade exposed; one that is too large bunches and slips off in the bag. Use the maker’s chart, not your shoe size.

Look at the bottom. A serrated or textured sole grips wet concrete and rubber mats on hard guards, while a reinforced bottom strip on a soaker resists the blade cutting through the fabric. The bottom fails first on cheap covers, so reinforcement there signals a cover built to last.

Dry blades before you cover them. Even the best soaker works better when the blade is wiped first. Wipe the blade dry with a towel, slip on soakers for the trip home, and let the skates air out of the bag afterward. Leaving wet skates sealed in a bag is how rust starts, no matter which covers you own.

Rollergard Ice Skate Guards, One Size Fits All

The Rollergard takes the hard guard concept and adds wheels. Instead of walking heel-to-toe on a plastic channel, you step into the guard and roll, with the blade suspended between the wheels by what the maker calls a floating blade system. The edge never touches the ground, so the guard protects the sharpening while turning the walk from the car to the rink into a short roll. It is the most distinctive design in this guide.

The listing describes a one-size design with 2.25-inch polyurethane wheels, a step-in fit, and an included Allen wrench set. The guards measure 13.75 x 6.75 x 3 inches and weigh about 2 pounds for the pair, so they are bulkier in a gear bag than flat plastic guards. Rollergard’s guidance covers hockey and figure skates, and the wheels are non-marking.

  • Specs
  • Type: Rolling hard guard
  • Brand: Rollergard
  • Part number: 44374
  • Fit: One size, step-in
  • Wheels: Polyurethane, 2.25 inches
  • Dimensions: 13.75 x 6.75 x 3 inches
  • Weight: 2 pounds (pair)
  • Included: Allen wrench set, setup instructions

Who it’s for: Hockey players who walk real distances on pavement or concrete in their skates and want the blade kept completely off the ground. Who should skip: Skaters who mostly move between a bench and the ice gate, anyone who dislikes extra bulk in the bag, and anyone who wants one cover that also works for storage.

Guardog Ice Skate Hard Guards Chameleonz (Blue to Green)

Guardog is the name most figure skaters learn first, and the Chameleonz version of its two-piece hard guard shows why the design has lasted. Two rigid sections join with springs and screws, and the guard is trimmed until it matches your blade length, so one pair can be fitted precisely instead of rattling in a one-size channel. The springs stretch as you pull the guard on and hold it in place while you walk.

The Chameleonz finish changes color when it gets cold, shifting from blue toward green at rink temperatures, and the guards are lightly scented. Under the novelty it is the standard Guardog pattern: a hard plastic channel that protects the edge on rubber mats, tile, and concrete. The fit range runs from small youth blades up to full-size figure blades once trimmed, and the springs are a normal wear item over the seasons.

  • Specs
  • Type: Two-piece hard guard
  • Brand: Guardog
  • Model: GDG-ADD-FBA-CHAMELEON-BLUETOLIME
  • Fit: Trim to fit, spring-loaded
  • Finish: Color-changing (blue to green), scented
  • Assembly: Springs and Phillips-head screws included
  • Intended skates: Figure skates
  • Weight: not stated

Who it’s for: Figure skaters, especially younger skaters, who want a hard guard fitted exactly to their blade and will enjoy the color change. Who should skip: Skaters who do not want assembly or trimming before first use, and hockey players better served by a wider hockey channel.

Elite Hockey Pro-Skate Guard, Extreme Walking Soaker

Elite Hockey’s Pro-Skate Guard is the hybrid of this guide: a soft soaker body with a rubber traction strip along the bottom, so it can handle short walks as well as storage duty. The inner lining is treated with a vapor corrosion inhibitor, intended to slow rust on blades stored inside, and the water-resistant nylon exterior keeps outside moisture from soaking through in a damp bag. Inside, molded EVA foam cradles the runner so the edge stays cushioned in transit.

Sizing comes in youth, junior, and senior bands; junior/medium covers skate sizes 1 through 5, senior/large covers roughly 6 through 10, and a senior extra-large reaches the biggest boots. The listing gives a weight of 249 grams and an interior channel height of 22 millimeters, which helps the guard hold the blade securely. Size up if you are at the top of a band, since the foam interior fits snugly by design.

  • Specs
  • Type: Walking soaker (soft guard with rubber sole)
  • Brand: Elite Hockey
  • Model number: 134XX-GUARD
  • Material: Polyester with water-resistant nylon exterior
  • Lining: VCI-treated, molded EVA foam interior
  • Sizes: Youth, Junior/Medium (1-5), Senior/Large, Senior/X-Large
  • Interior channel height: 22 millimeters
  • Weight: 249 grams

Who it’s for: Hockey players who want one cover that can walk from the dressing room to the bench and then protect blades in the bag, and anyone whose stored skates keep rusting. Who should skip: Skaters who walk long distances on rough pavement or need a true hard guard.

A&R Sports Blade Cover

The A&R Sports Blade Cover is the traditional terry soaker, made by one of the longest-running accessory makers in skating. Its wickaway liner pulls meltwater off the blade after a session, the main defense against rust between skates, and the soft body keeps edges from nicking each other or cutting into bag linings and other gear.

A&R’s sizing chart splits by skate type: for hockey skates, small fits up to size 1, medium covers sizes 2 to 6, and large fits size 7 and up; for figure skates, small fits up to size 13, medium covers 1 to 5, and large fits 6 and up. The covers come in a wide range of colors, handy for matching team colors or color-coding pairs for siblings.

  • Specs
  • Type: Terry cloth soaker
  • Brand: A&R Sports
  • Liner: Wickaway moisture-wicking liner
  • Sizes: Small, Medium, Large
  • Hockey fit: Small up to 1, Medium 2-6, Large 7 and up
  • Figure fit: Small up to 13, Medium 1-5, Large 6 and up
  • Sold as: One pair
  • Weight: not stated

Who it’s for: Hockey and figure skaters who want a proven, absorbent soaker for drying and storing blades, and families buying several pairs in different colors. Who should skip: Anyone who needs to walk on concrete or pavement in their skates, since a soft cover offers no walking protection at all.

EALER BDT100 Ice Skate Blade Covers

The EALER BDT100 covers are a straightforward budget soaker: soft blade covers in small, medium, and large bands for kids, youth, and adult skates. The listing covers hockey, figure, and recreational ice skates, so one style can serve a household with different kinds of skates. At 100 grams, the pair adds almost nothing to a gear bag.

The three-size system keeps ordering simple, and the covers come in a range of colors. As with any soft cover, the job here is absorbing moisture after you skate and shielding the edge in storage and transit; the BDT100 is not a walking guard. For new skaters building a first kit, or as a spare pair to rotate while the main soakers dry, it is the low-fuss option in this guide.

  • Specs
  • Type: Soft blade cover (soaker)
  • Brand: EALER
  • Model: BDT100
  • Sizes: Small (kids), Medium, Large
  • Fits: Hockey, figure, and recreational ice skates
  • Item weight: 100 grams
  • Parcel dimensions: 14.5 x 12.4 x 6.4 cm
  • Material: not stated

Who it’s for: New skaters and anyone who wants an inexpensive spare pair of soakers for the bag. Who should skip: Skaters who need walking protection or a reinforced, rubberized bottom for heavier use.

Frequently asked questions

Do I need both hard guards and soakers?
For most skaters, yes, because they do different jobs. Hard guards protect the blade while you walk on hard surfaces; soakers absorb moisture and protect the blade in storage and transit. Only hard guards risks rust from trapped moisture, and only soakers means your edges meet concrete unprotected.

How do I choose the right soaker size?
Use the maker’s chart for your skate type, because hockey and figure bands differ. If your skate size sits at the top of a band, sizing up is usually safer, especially for foam-lined walking soakers that fit snugly. A soaker should cover the full blade, toe to heel, without stretching hard to get on.

Can I walk to the rink in soakers?
Only in walking soakers with a reinforced or rubberized bottom, and only for short distances on smooth floors. Standard terry soakers wear through quickly on concrete and give the blade no protection from grit. For parking lots and long concourses, use hard guards or rolling guards instead.

How do I stop my blades from rusting in the bag?
Wipe the blades dry with a towel as soon as you come off the ice, put soakers on for the trip home, and take the skates out of the bag to air dry afterward. A corrosion-inhibiting lining, like the treated lining in the Elite Hockey guard above, adds another layer of defense between weekly sessions.

Final verdict

Start with the job you need done. If you walk any real distance in your skates, the Rollergard is the standout pick, since its wheels keep the blade off the ground entirely, while the Guardog Chameleonz gives figure skaters a classic trim-to-fit hard guard. For storage and rust prevention, the A&R Sports Blade Cover is the dependable terry soaker, the EALER BDT100 covers the same job on a budget, and the Elite Hockey Pro-Skate Guard is the pick if you want one cover for short walks and long storage alike. Whichever you choose, the habit matters as much as the product: dry the blade, cover it, and let the skates air out at home.

Product and ASIN Reference

Product ASIN
Rollergard Ice Skate Guards, One Size Fits All B004IR705Y
Guardog Ice Skate Hard Guards Chameleonz (Blue to Green) B00JX7B7Z8
Elite Hockey Pro-Skate Guard, Extreme Walking Soaker B00VEEUTA2
A&R Sports Blade Cover B01FVU86JA
EALER BDT100 Ice Skate Blade Covers B08PYX2TF8
A
admin@88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Skate Guards and Soakers to Protect Your…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account

As an Amazon Associate we earn from qualifying purchases.